Back Print
Add to Storyboard
Add to Storyboard


Dot Free LED Strip Light

Application: Strip

The LOL-STR-1013 is designed for either indoor or outdoor installations where space is restricted. The anodized aluminium profile is weatherproof and opaline acryllic diffuser a emits dot free light. Maximum IP rating 65 is achieved with recommened housing extrusion and installation procedures. Should mechanical protection be required we recommend installation in the housing extrusion. Different extrusion profiles for recessed or corner installations are available – contact Light On Landscape. Exposure to direct sunlight (intense UV) should be avoided.



  • 10H x 10W

Power Input

    24V DC

Lamp details

  • Lamp 120 LED chips per metre

Power usage

    4.8W, 9.6W

Beam Angles


Colour Temperature



    360 or 720 per mtre



Finish type

  • Anodized aluminium with opaline diffuser

Important notes

* Order length as required. Max length 5000mm. Cut lengths in 50mm increments. Do not exceed maximum single run length. If a longer overall length is required contact Light On Landscape. End caps provided.** Dimmable via 0-10V dimmer. Please contact us

General Notes & Installation

Note: All dimensions and other specifications can change without notice. Please contact Light on Landscape to confirm the availability and current specifications of this luminaire. Installation: Light on Landscape strongly recommend that all luminaires be correctly installed and maintained. Failure to do so will result in the voiding of the manufacturer's warranty and the reduced efficiency, performance and life of the fixture. To eliminate voltage drop, we advise that the recommended UV stabilized cable and run lengths are used, along with soldered joins, heat shrink connectors and quality lamps.


Surface mount mounting clips or 3M tape